Project Portfolio

 

Your search for Industry: Food, Dairy and Beverage has returned 116 results.

Multi-pass Clean In Place Systems were fabricated and installed as process modules. The modules contained 500 gallon stainless steel vessels, designed to meet 3A sanitary standards, 80 gallon, vortex-free, stainless steel vessels, multiple shell-and-tube heat exchangers and routing valves. The components were assembled onto a 304 stainless steel, tubular frame. Controls and instrumentation were included to provide a user-friendly, automated system.

A system of 304 stainless steel piping, with hangers and hanger supports, was installed for product distribution. The system incorporated various valves and four diaphragm pumps.

A 450 gallon Vacushear Mix system with an attached powder hopper was fabricated, automated and installed. This unit was made from 316L stainless steel and all surfaces polished to a #4 finish. A sanitary sight glass and light assembly were included in the system.

An insulated, 200 gallon, 316L stainless steel Vacushear Mix vessel with a heat transfer jacket, was assembled onto a tubular frame. The process module also included a holding vessel and a bag dumper.

An air-conveying dehumidifier and heater were supplied, together with various filters and accessories.

This project involved the installation of sanitary, stainless steel piping and tubing in a system that incorporated various PD pumps, centrifugal pumps, diaphragm pumps, flow panels and valves.

Several modular valve units and two Clean In Place Systems were provided. The CIP systems required three 800 gallon, stainless steel vessels, fabricated to 3A standards. The systems also contained a 26 gallon vessel, a three-liter vessel, various heat exchangers and filters as specified by the customer. The components were connected with sanitary piping and tubing and assembled onto a tubular frame.

A 450 gallon Vacushear Mix system with a 20 HP mixer and a powder hopper was installed. The mixing system was fabricated from 316L stainless steel with surfaces polished to a #4 finish. A sanitary sight glass and light assembly were added.

Four 500 gallon, vertical vessels, designed to meet the 3A sanitary standards, were fabricated from 316L stainless steel. Each vessel was fitted with a heat transfer jacket, with a scraper agitator and drive assembly supported on a bridge-style mounting. The sidewalls and bottom heads of the vessels were clad with fiberglass insulation.

Two vertical, single shell 150 gallon surge vessels were fabricated and installed. Each vessel, constructed from 316L stainless steel, was fitted with a CIP spray device and a scraper agitator with a drive assembly. A separate 50 gallon, 316L stainless steel, surge vessel, fitted with a CIP spray device and scraper agitator was also provided.

 

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10