Project Portfolio

 

Your search for Industry: Renewable Energy and Industrial has returned 49 results.

Multiple 8-port sub-manifold filter rack assemblies were fabricated to match the 9-port racks presently used by the customer. The assemblies included “spinnings” and valve guide sockets.

Several stainless steel vessels were fabricated, including a 2000 gallon flash vessel, a 300 gallon evaporator-condenser receiver, a CO2 stripper and a 4700 gallon side stripper column. All the vessels were to be used outdoors and were therefore designed to UBC 1997 Code for 90 mph winds.

Two 1200 gallon, stainless steel tanks were fabricated. The tanks had straight sides with a 15° cone bottom and each was fitted with an agitator.

Several first effect and second effect evaporators were designed and fabricated for both the shell and tube sides, with the latter requiring separators. The stainless steel materials were as specified by ASME guidelines for both inside and outdoor locations where applicable.

Multiple first and second effect reboilers, based upon 500 gallon tanks, were designed and fabricated to meet ASME Section VIII specifications and code stamped. An evaporator condensate receiver, designed for an outdoor location, was also fabricated.

Based on drawings provided by the customer, two vertical, single shell UHLE box separators were fabricated using 316 stainless steel. A vertical, single shell Suction Press Roll High Separator and a Dry End Pulper Separator were also fabricated.

Two mitered stainless steel (316L) elbows, designed for full vacuum, were fabricated, with attached stainless steel (304) sole plates and a base stand. Spool piping and reducers were also provided.

Forty eight 8-port rack submanifold assemblies were fabricated, each having a 6 inch manifold with spinnings and valve guide sockets.

Seventy two 9-port submanifold assemblies were fabricated, each having a 6 inch manifold with spinnings and valve guide sockets.

Four first effect and four second effect evaporators were fabricated to be consistent with designs provided for an earlier project by the customer.

 

1 | 2 | 3 | 4 | 5